I am not sure how “fashionable” discrete transistor design is nowadays, but anyone using discrete transistors, bipolar or otherwise, for high speed designs other than for switching probably knows about cascode designs. The purpose of a cascode amplifier (not to be confused with cascade which is a chain of two or more amplifiers) is to […]
FAQ
5 ways to generate a sine wave
It is not uncommon to need a sine wave but how do you generate it? The “best” or most appropriate method for a particular application depends on several things such as: frequency, purity required, amplitude, possible synchronization with another frequency, variable frequency and/or amplitude. At lower frequencies a Wien bridge might be considered – for […]
Open loop gain: how to measure with SPICE
When designing opamps in analog IC design, it is frequently required to plot the open loop gain/phase. One way of doing that is to use a high feedback resistor and very high capacitance so the feedback network has an extremely low corner frequency: This works fine unless your opamp drive capability is low, in which […]
