The well-known and extensively analyzed lumped-element bandpass filter is generally not suitable for the RF/microwave region, but there are many distributed-element, energy-based alternatives. Part 1 of this article established the context for these RF/microwave filters, which operate in the spectrum from several hundred MHz and higher, and increasingly cannot use discrete lumped-circuit elements (RLCs). Instead, […]
RF couplers cover 26.5 GHz to 67 GHz range
Fairview Microwave Inc., an Infinite Electronics brand, has debuted a new line of high-frequency couplers that are ideal for point-to-point radios, 5G telecommunications, satellite communication, automotive radars, and aerospace applications. Fairview’s new series of high frequency RF directional couplers is comprised of 24 new models that deliver excellent isolation, low insertion loss, and very good return […]
Technology boosts on-board antenna performance up to 2 dB
New technology is said to deliver significantly better antenna performance. This innovation is particularly suited to designs with shorter ground planes, allowing IoT and other device designers to field a wider range of smaller devices that would otherwise not have been able to meet certain stringent carrier certification requirements. Taoglas Boost uses a new technique […]
First embedded PIFA antenna for Wi-FI MIMO apps
Laird announced the FlexMIMO – the industry’s first flexible PIFA antenna for Wi-Fi MIMO applications. The FlexMIMO has two integrated 2.4/5 GHz dual-band antenna elements specifically designed for 802.11 MIMO applications, such as automated equipment, medical devices and a myriad of Internet of Things (IoT) use cases. The FlexMIMO is based on a Planar Inverted-F Antenna […]
Thin band-pass filters span 620 to 5,930 MHz range, features low insertion loss
AVX Corporation has released a new series of low-profile, high-performance band-pass filters based on AVX’s patented and proven multilayer organic (MLO) high-density interconnect technology. The new BP Series MLO band-pass filters incorporate high-dielectric-constant and low-loss materials that are expansion matched to most organic PCB materials, providing improved reliability over standard silicon and ceramic devices, feature an […]
Radio receiver architectures, Part 1—TRF and Superhet
A transmitter has much-less challenging task than the receiver. The former operates on a higher-level, known signal in a known setting, while the latter must find and decode a largely unknown signal corrupted by internal and external noise, interference from other signals, distortion, low signal levels, and constantly changing parameters. This FAQ looks at the […]
Waveguide-to-coax adapters cover 1.7 to 110 GHz
These waveguide-to-coax adapters are offered in a broad selection of waveguide sizes, flanges, connectors and materials. They support 13 different types of coax connectors and are available with UG (square/round cover), CMR, CPR and UDR-style flanges. These waveguide to coax adapters deliver VSWR performance as low as 1.2:1 and can be constructed from aluminum, gold-plated […]
802.11ax modules and BAW filters improve coverage, lower costs
The expanded, high-efficiency portfolio of 802.11ax integrated modules and advanced filters from Qorvo are designed to improve Wi-Fi coverage, enables smaller end products, and reduces costs for consumers, service providers and manufacturers. 802.11ax will greatly increase network capacity by supporting up to eight simultaneous data streams, each delivering up to 1.2 Gbps, to connect many more […]
Super-small 3-to-20-GHz mixer supports dc-to-6-GHz IF
Analog Devices, Inc., which recently acquired Linear Technology Corporation, announces the LTC5552, a double balanced mixer that features best-in-class wideband matching from 3GHz to 20GHz. The mixer can be used as an up- or downconverter. The LTC5552 is especially useful in upconversion applications with its DC capable differential IF port that enables the LO to be […]
Varistors head off ESD in capacitance-sensitive apps
AVX Corporation has released the new Antenna PowerGuard Series varistors, an ultralow capacitance extension of its reliable AntennaGuard range with new voltage, capacitance, and energy ratings. Antenna PowerGuard Series varistors exhibit highcurrent and energy handling capabilities, low insertion loss, low leakage current, and unsurpassed reliability compared to diode options. These advantages, combined with AEC-Q200 qualification, bidirectional […]
- 1
- 2
- 3
- …
- 7
- Next Page »
