• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar
  • Skip to footer

Analog IC Tips

Analog IC Design, Products, Tools Layout

  • Products
    • Amplifiers
    • Clocks & Timing
    • Data Converters
    • EMI/RFI
    • Interface & Isolation
    • MEMS & Sensors
  • Applications
    • Audio
    • Automotive/Transportation
    • Industrial
    • IoT
    • Medical
    • Telecommunications
    • Wireless
  • Learn
    • eBooks / Tech Tips
    • FAQs
    • EE Learning Center
    • EE Training Days
    • Tech Toolboxes
    • Webinars & Digital Events
  • Resources
    • Design Guide Library
    • Digital Issues
    • Engineering Diversity & Inclusion
    • LEAP Awards
    • Podcasts
    • White Papers
    • DesignFast
  • Video
    • EE Videos
    • Teardown Videos
  • EE Forums
    • EDABoard.com
    • Electro-Tech-Online.com
  • Engineering Training Days
  • Advertise
  • Subscribe

Common mode filter for automotive Ethernet reduces line-to-line capacitance

February 8, 2023 By Redding Traiger

TDK Corporation has announced the introduction of its new ACT1210E Series (3.2 x 2.5 x 2.5 mm (L x W x H)) of common mode filter for automotive Ethernet 10BASE-T1S. Mass production of this new common-mode filter began in February 2023.

This product is the industry’s first common mode filter for automotive Ethernet 10BASE-T1S. Adopting TDK’s proprietary wire winding structure and optimal materials, this product achieves the industry’s best high
S-parameters (Scattering parameters) and a maximum line-to-line capacitance of 10 pF. The operating temperature range is from -40 to +125 °C. Laser welding winding wires to the metalizing terminals provide high thermal shock resistance and outstanding reliability.

Amid the recent increase in the attention being paid to the autonomous driving of automobiles, the installation of electronic control units (ECUs) relating to safety functions, including those for advanced driver-assistance systems (ADAS) is increasing. Among the Ethernet telecommunication standards, 10BASE-T1S is unique in its support of multidrop topologies which enables multiple ECUs to be connected. In this respect, it differs from 100BASE-T1 and 1000BASE-T1, which support Peer-to-Peer telecommunication only. More and more customers are now considering shifting from the CAN, CAN FD, and Flex-Ray standards, which are currently commonly used because they support multidrop connections, to Ethernet systems to achieve a uniformity of standards. The new product will demonstrate its characteristics are suited to these needs and contribute to improving the quality of telecommunication and suppressing noise.

TDK has an extensive lineup of common mode filters for automotive applications, including not only filters that are compliant with the current mainstream CAN, CAN FD, and Flex-Ray protocols but also filters compliant with Ethernet protocols, such as 100BASE-T1 and 1000BASE-T1 for telecommunication speeds of 100 Mbps and 1 Gbps respectively. Moving forward, TDK will continue catering to the needs of customers by providing comprehensive product services for common mode filters for automotive communication.

As of February 2023, according to TDK

You may also like:


  • What causes signal attenuation in a PCB and how can…

  • When to filter, attenuate, and equalize signals

  • What kinds of attenuators are there?

  • What are MEMS relays good for?

  • When to use a relay and when to use a…

Filed Under: Automotive/Transportation, filters, Products, Telecommunications, Tools Tagged With: tdkcorporation

Primary Sidebar

Featured Contributions

Design a circuit for ultra-low power sensor applications

Active baluns bridge the microwave and digital worlds

Managing design complexity and global collaboration with IP-centric design

PCB design best practices for ECAD/MCAD collaboration

Open RAN networks pass the time

More Featured Contributions

EE TECH TOOLBOX

“ee
Tech Toolbox: Internet of Things
Explore practical strategies for minimizing attack surfaces, managing memory efficiently, and securing firmware. Download now to ensure your IoT implementations remain secure, efficient, and future-ready.

EE LEARNING CENTER

EE Learning Center
“analog
EXPAND YOUR KNOWLEDGE AND STAY CONNECTED
Get the latest info on technologies, tools and strategies for EE professionals.

EE ENGINEERING TRAINING DAYS

engineering

RSS Current EDABoard.com discussions

  • Hard wired security cameras
  • Calculating inductor value for buck converter using XL1509 IC
  • i need an embedded c program that will read a 12 bit memory address from the io pins and output the data to pins from the memory in a 8051 mcontroller
  • Spice model for diode for rectifier simulation
  • Can I Flip Primary Connections on Mini-Circuits TCN1-10+ to Invert Output Polarity?

RSS Current Electro-Tech-Online.com Discussions

  • Funny Images Thread!
  • 12v battery, 18v magic
  • Back to the old BASIC days
  • Need help in repairing a dead motherboard
  • LED circuit for 1/6 scale diorama
“bills

Design Fast

Component Selection Made Simple.

Try it Today
design fast globle

Footer

Analog IC Tips

EE WORLD ONLINE NETWORK

  • 5G Technology World
  • EE World Online
  • Engineers Garage
  • Battery Power Tips
  • Connector Tips
  • DesignFast
  • EDA Board Forums
  • Electro Tech Online Forums
  • EV Engineering
  • Microcontroller Tips
  • Power Electronic Tips
  • Sensor Tips
  • Test and Measurement Tips

ANALOG IC TIPS

  • Subscribe to our newsletter
  • Advertise with us
  • Contact us
  • About us

Copyright © 2025 · WTWH Media LLC and its licensors. All rights reserved.
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of WTWH Media.

Privacy Policy