Wire wound structures are the most common, but far from only, way to make inductors for audio, power conversion, radio frequency (RF), and other applications. Inductors are key components in various circuits, and designers need to fully understand available options.
This FAQ starts with a brief background on wirewound inductors and then digs into the cost and application tradeoffs associated with multilayer thin and thick film inductors, flat inductors (including Litz wire with a rectangular cross-section), and foil inductors.
Wirewound inductors are available for various inductance values, frequencies, power handling capabilities, and applications (Figure 1). Inductors and chokes are differentiated by how they are used. Inductors are used primarily on power and signal lines to filter differential noise and to store electrical energy in power conversion circuits. The component is referred to as a choke when used to filter common mode noise.
In the most basic implementation, an inductor consists of a coil of insulated wire (magnet wire). Inductors can be free-standing or wound on a plastic core to make an air-core inductor. To support higher inductances, a ferromagnetic core can be used. When a ferrimagnetic material is used for the core, it’s called an iron core inductor.
The core is a key component in an inductor and has a major impact on performance. Ferromagnetic cores have a high permeability that increases the strength of the magnetic field, resulting in higher inductance values. Laminated steel cores prevent eddy currents and improve the efficiency of inductors used at line frequencies. Soft ferrite cores are used for inductors that operate at frequencies above a few tens of kHz. Inductors designed to filter very high frequencies can be made simply by stringing a ferrite bead on a wire.
Inductors in electronic systems can be made with wire coils, multilayer structures, or thin-film materials (Figure 2). The core of wound inductors contributes to a lower DC resistance of the windings and improves the efficiency of the inductor. Multilayer inductors consist of laminated or printed structures and are often used on signal lines as part of a filter or impedance matching circuit. The ‘wires’ in these inductors consist of a coil pattern screen printed on multiple layers of ferrite substrate material. Their three-dimensional structure is completely covered by the ferrite, which acts as a magnetic shield and reduces leakage, making them especially suitable for high-density applications. When the frequency exceeds a few hundred MHz, ferrites experience increased losses and are not suitable as substrate material. In those applications, a dielectric ceramic substrate is substituted for the ferrite.
Why use flat wires?
Wirewound inductors are good solutions in many applications. However, in higher frequency designs, the wires experience the skin effect where the current flows in a constrained region near the surface of the conductor, with little or no current in the central area. The skin effect results in higher AC resistance at higher frequencies. At higher frequencies, the skin depth where the current flow takes place shrinks and causes the AC resistance to increase. Opposing eddy currents induced by the alternating magnetic field are the source of the skin effect.
The use of flat wire is one possible solution to the problem of the skin effect. A flat wire has about 60% more surface area with the same cross-sectional area. With more surface area, the impact of the skin effect is reduced. Flat wires can be used to reduce the impact of the skin effect at up to about 5 MHz and also support higher inductance values and higher currents.
In addition to mitigating the skin effect, flat wire can have a winding factor of up to 95%, making for smaller inductors. In a conventional wire-wound inductor, the unused space in the gap between the windings can be up to 30%, compared with only 5% for flat wire (Figure 3).
To further increase the effective density, some flat wire inductors have a powdered iron core molded directly around the wires. That eliminates all wasted space and results in higher efficiency and smaller packages for given inductance and current ratings.
Litz wire
Flat wire is great at providing a more effective surface area in conductors, reducing the impact of the skin effect, and improving packing density and thermal dissipation. But Litz wire can take those performance benefits to the next level. Litz wire also reduces losses from the proximity effect. When alternating current flows through adjacent conductors, the current distribution in each conductor will be constrained in small regions by the magnetic fields. This current crowding is called the proximity effect and increases the effective resistance of the conductors compared with the DC resistance. At high frequencies, the proximity effect can increase the AC resistance by order of magnitude compared to the DC resistance. As a result, Litz wire is often found in high-frequency and high-current inductors (and transformers) that operate at hundreds of kHz.
Litz wire comprises many small insulated copper wires braided or woven together. Using specific braiding or weaving patterns, the proportion of each strand at the exterior of the wire is distributed equally among the strands and results in an operational efficiency up to 100% higher than conventional wirewound inductors. Simple twisted-strand wire cannot deliver the efficiency improvement of Litz wire. Litz wire can be round or rectangular; rectangular Litz wire can support high winding factors like flat conductors, but with an even greater decrease in skin and proximity effects (Figure 4).
Figure 4: Litz wires consist of many small insulated copper wires and can be produced in both round and flat or rectangular structures. (Image: Rudolf Pack)
Copper foil
Foil inductors can be used across a range of power applications. Today, they are mostly used in audio systems such as loudspeaker crossover networks. Audiophiles like the acoustic characteristics of copper foil inductors. They are fabricated with high winding tension, and the faces of the foil conductors are fused in place, making a highly stable mechanical structure. Wirewound inductors, on the other hand, may not be as stable and can allow relative motion in the audio range between the conductors resulting in frequency modulation distortion and a lower quality of sound.
Foil inductors also have superior thermal dissipation enabling cooler operation even during long periods of high output power when high sound volumes are needed to fill large spaces. The copper foil is more effective at dissipating heat than wire-wound inductors, and foil inductors have a higher winding density, contributing to improved thermal dissipation. Other benefits of foil inductors include:
- Skin effect is several orders of magnitude better than wire-wound inductors at frequencies up to 100 kHz
- Relatively flat inductance from 5 Hz to 50 kHz, well suited for audio applications
- Air core design eliminates saturation distortion
- Small size and high fill factor
- More rugged electrically and mechanically. The copper foil reduces voltage stresses between the windings and has higher mechanical strength than wire-wound inductors.
- Lower in cost since copper foil costs less than Litz wire, and foil inductors are usually fabricated without a ferrite core.
Summary
Inductors are ubiquitous components used in a range of applications in electronic systems. While wire wound inductors using magnet wire are a common implementation, they are also fabricated using thin film materials, flat wires, Litz wires, and copper foils. Each fabrication method produces inductors with unique characteristics optimized for specific application and cost needs.
References
Advantages of Flat Wire Inductors for High Frequency, High Current Designs, Bourns
Foil Inductors, Bridgeport Magnetics
Inductors, Wikipedia
Layering/thin-film technologies and ferrite, TDK
Litz Wire Transformers and Inductors, Agile Magnetics
Planar Litz Wire, Rudolf Pack