• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar
  • Skip to footer

Analog IC Tips

Analog IC Design, Products, Tools Layout

  • Products
    • Amplifiers
    • Clocks & Timing
    • Data Converters
    • Interface & Isolation
    • MEMS & Sensors
  • Applications
  • Video
    • TI Video Channel
  • EE Forums
    • EDABoard.com
    • Electro-Tech-Online.com
  • EE Resources
    • DesignFast
    • eBooks / Tech Tips
    • FAQs
    • LEAP Awards
    • Podcasts
    • Webinars
    • White Papers
  • EE Learning Center

SMD Piezo sounder boasts louder output in a small footprint

August 10, 2021 By Redding Traiger

Murata Electronics has newly developed the PKMCS0909E48H0-R1 SMD Piezo Sounder at 4.8 KHz which is a new and improved model from the current SMD sounder (PKMCS0909E4000-R1). The new sounder uses the same 9mm x 9mm footprint, is 1mm taller, uses new materials, operates at 800 Hz higher in frequency, and boosts the sound pressure level to 75dB (+/- 2.5V0-p 4.8 kHz, square wave, 10cm). This allows for a greater sound pressure level which was previously only available in a larger size, non-SMD sounder.

Targeted applications include consumer, commercial and industrial applications where audible feedback or alarm notification is required for the operator, such as Home White Goods/Kitchen Appliances; Point Of Sale Electronic Registers; Healthcare Equipment; EDP equipment; Industrial Controls/Instrumentation;

Additional Specs: SPL: 75dB typ. (+/-2.5V0-p, 4.8kHz, square wave, 10cm; Size: 9mm (same footprint as previous PKMCS0909E4000-R1 model); Height: t=3.0mm (1.1mm higher than PKMCS0909E4000-R1);

You may also like:

  • acoustic waves
    Audio filters: Understanding acoustic waves – Part 2
  • sound waves
    Audio filters: Understanding sound waves – Part 1
  • VSWR and impedance
    The basics of VSWR and impedance, Part 1

  • A comparison of EMI test setups and specifications for automotive,…

  • A comparison of EMI test setups and specifications for automotive,…

Filed Under: Applications, audio, Industrial, Medical, Products, Tools Tagged With: murataelectronics

Primary Sidebar

Subscribe to Our Newsletter

Subscribe to weekly industry news, new product innovations and more.

Subscribe today

EE Training Center Classrooms

“ee

“ee

“ee

“ee

“ee

“ee

RSS Current EDABoard.com discussions

  • I am Alec, a new member!
  • electrode-skin impedance mismatch
  • how to estimate Senseamp offset voltage to use montecarlo ?
  • Weird transformer result in ads
  • could calibre lvs do not check mosfet B term

RSS Current Electro-Tech-Online.com Discussions

  • Relaxation oscillator with neon or...
  • High component count for long delay circuit (inrush resistor switch out)
  • DIY Mini 12v Router UPS malfunction
  • MOSFET gets hot and burns
  • Positive and negative sides of voltage source

Follow us on Twitter

Tweets by AnalogICTips

Design Fast

Component Selection Made Simple.

Try it Today
design fast globle

Footer

Analog IC Tips

EE WORLD ONLINE NETWORK

  • EE World Online
  • EDA Board Forums
  • Electro Tech Online Forums
  • DesignFast
  • Connector Tips
  • Microcontroller Tips
  • Power Electronic Tips
  • Sensor Tips
  • Test and Measurement Tips
  • Wire and Cable Tips
  • 5G Technology World

ANALOG IC TIPS

  • Subscribe to our newsletter
  • Advertise with us
  • Contact us
  • About us
Follow us on Twitter Add us on Facebook Follow us on YouTube Follow us on Instagram

Copyright © 2022 · WTWH Media LLC and its licensors. All rights reserved.
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of WTWH Media.

Privacy Policy