As design frequencies now routinely go into the hundreds of MHz and tens of GHz range, conventional voltage and current measurements are not useful. However, scattering (s) parameters can fully characterize the RF component or path performance. For engineers with experience focused from DC to several hundred megahertz, it is usually sufficient to characterize components […]
FAQ
Fluxgate compasses, Part 2 – Issues and enhancements
Part 1 of this FAQ examined the underlying context of fluxgate compasses and navigation, as well as the basic principles of the fluxgate design. This part looks at additional fluxgate-compass issues and advances in their implementation. The fluxgate compass is fairly simple in principle. However, as with all things related to magnetism in general and […]
Fluxgate Compasses, Part 1 – Context and principles
Despite the availability of GPS and inertial measurement units, the compass in an electronic fluxgate implementation is still a viable and needed navigational tool. The classic magnetic-needle compass is not getting much respect or attention these days. Between the Global Positioning System (GPS) and the Inertial Measurement Unit (IMU) system, the compass – whether it […]
Printed Circuit Boards, Part 4: Beyond FR-4
Part 4 concludes this FAQ with some fabrication issues and at substrates with performance which is multi-GHz-compatible and goes beyond that available using FR-4 material. Q: What’s the set-up situation for PC board fabrication? A: The production-level fabrication process is optimized for runs of tens, hundreds, and thousands of boards, as there is a set-up […]
Printed Circuit Boards, Part 3: Vias and multilayer boards
Part 1 of this FAQ series looked at the ubiquitous FR-4 PC board as well as other PC board issues, and Part 2 reviewed highlighted some of the board issues and the widely used FR-4 PC board substrate. This third part looks at advanced PB board issues such as vias and multilayer boards. Q: How […]
Printed Circuit Boards, Part 1: Context and phenolic boards
Despite appearances, there’s nothing simple about the materials or fabrication of the ubiquitous PC board, and the requirements of multi-GHz systems are increasing the performance demands placed on these boards. We take the standard, usually green, printed circuit board (PC board or PCB) for granted, but it has an interesting history, alternatives, and future. This […]
What are RF waveguides? Part 2: implementation and components
Part 1 of this FAQ looked at the context and the need for waveguides; Part 2 looks at the implementation and available components. Q: What standard waveguide are available? A: There are thousands of models, configurations, and options. Most waveguides have flanges so they can be connected to create longer guides, or to provide turns […]
What are RF waveguides? Part 1: context and principles
Waveguides confine and covey electromagnetic energy in the GHz+ range, just as coaxial cables do; they offer lower loss and other virtues, but at a cost in parts and ease of use. Waveguides (sometimes spelled out as wave guides) do not have the visibility or convenience of coaxial cables but they are an essential passive […]
5 things you need to know about 5G filters
by Robert Hammond, Resonant CTO, and Mike Eddy, Resonant VP Product Marketing & Business Development 5G networks operate in new and higher frequency bands, requiring new underlying technology and performance standards for RF filters. The industry must develop new resonating structures in order to filter at these high frequencies, and large bandwidths, with enough power […]
Magnetron, Part 2: History and future
Part 1 of this FAQ looked at the application and operating principles of the magnetron. This part explores the development and special history of the device, as well as disruptive alternative technologies for some applications. Q: What’s the history of the magnetron? A: The development and production of the magneton was a major advance during […]