A new socket has been developed by Ironwood Electronics for 0.5mm pitch FCCSP78 packages, enabling direct integration onto application boards while maintaining electrical performance similar to soldered connections. This socket is designed for a 15×6 array configuration and utilizes a high-speed, low-inductance elastomer interface to ensure signal integrity across a broad range of operating conditions. […]
ATE test contactors for Analog/RF/MMWave device testing
Ironwood Electronics introduces its new Raptor line of ATE (automatic test equipment) test contactors. The cartridges, configured as quickly replaceable cartridges — a first for ATE applications — utilize Ironwood’s proprietary lamination technology for increased precision, convenience, and Mean Time Between Assist (MTBA). PicoRaptor high-performance rigid contact pins provide both high bandwidth and high insertion […]
Spring pin sockets support up to 34GHz with standard and custom designs
Ironwood Electronics’ new Spring Pin sockets (ESS) can be easily customized for specific test heights, force, plating finish, materials, etc. The spring pin functions as the interface between the IC package and the circuit board. These contacts support up to 34GHz bandwidth with standard designs, and with customization, impedance can be matched for the highest […]
Socket for optoelectronic module
Quickly and easily socket your optoelectronic module (BGA64, 0.45mm pitch, 7.7x10mm size) and verify the performance equivalent to the direct solder version using a high-performance spring pin with low inductance of 0.17nH that operates from -40C to +120C.
94GHz Swivel lid elastomer socket for BGA196
Quickly and easily Socket your 0.8mm pitch 14×14 array, BGA196 packages on any application board with performance equivalent to direct solder version using high speed and low inductance elastomer that operates from -55C to +160C.
Color-keyed thru-hole mount test points
Identification of test points in high-density PCB packages is the key to greater PCB production testing and service troubleshooting. Keystone Electronics has developed a full line of thru-hole mount test points with a color-keyed insulator base for visibility and quick identification to replace wire-wrap posts and turret terminals. The Keystone wire loop THM Test Points […]
Grypper sockets for BGA devices – controller, buffers and DDR’s
Ironwood Grypper sockets are great for enabling fast, easy swap out of BGA devices for development sorting and failure analysis. The Grypper socket allows you to snap the BGA device into the socket simply – no lid needed. The Grypper sockets are the same size as the device, “ZERO FOOTPRINT SOCKET,” so they will reflow […]
Elastomer socket for Ethernet switch device
High-Speed Elastomer Socket for Ethernet Switch Device Socket is constructed with high performance and low inductance elastomer contactor. The temperature range is -55 C to +150 C. The pin self-inductance is 0.10 nH, and the mutual inductance of 0.007 nH. Capacitance to ground is 0.069 pF. The current capacity is 4 amps per pin and […]
Inductors and all-mode filters now for frequencies up to 5 GHz
SMP Sintermetalle Prometheus GmbH & Co KG (SMP) has extended the frequency range for inductive components and filter systems. Filter damping in all-mode products now has an effective range of up to 5 GHz. SMP manufactures and develops EMC filter systems and inductive suppression components based on All Mode Technology (AM), a registered trademark of […]
94GHz elastomer socket for BGA324
GT sockets are ideal for prototyping and testing almost any BGA device application that requires high signal integrity. This new elastomer technology has silver particles held in conductive column-like buttons which are embedded in a non-conductive polymer substrate on a proper pitch that provides high compliance and works in extreme temperature ranges.