Digi-Key Electronics announced that it has expanded its product portfolio by signing a U.S. distribution partnership with Amphenol Procom, providing Digi-Key customers with an extensive offering of antenna, RF combiner, and RF filter products. This partnership further rounds out Digi-Key’s offering of the entire Amphenol product line. This expansion is part of Digi-Key’s Marketplace initiative […]
Shorts and shims span waveguide sizes from WR-430 to WR-10
Fairview Microwave Inc. has launched a new series of waveguide shorts and shims that are ideal for use in test and instrumentation, wireless communication, satellite communication, and radar applications. Fairview’s new line of waveguide shorts and shims includes 36 models offered in waveguide sizes ranging from WR-430 to WR-10. This new line is ideal for use in RF […]
Ultra-miniature GPS saw filter boasts tiny PCB footprint
Sunstu has released their Ultra-Miniature GPS Saw Filter with a PCB footprint of only 1.1mm x 0.9mm. The use of RF Filters in Global Positioning Satellites (GPS) is a necessity but it can be a challenge to find the smaller package sizes with low insertion loss. With the release of this Ultra-Miniature GPS Saw Filter, Suntsu […]
UHF modules handle narrow-band Tx/Rx tasks
Saelig Company, Inc. has announced the compact, multi-channel CDP-07M UHF Narrow-Band Transmitter/Receiver Pair: CDP-TX-07M (transmitter) and CDP-RX-07M (receiver). The modules contain almost all of the components necessary for radio transmission in a compact housing. The newly released CDP-TX-07M and CDP-RX-07M inherit the compact, high-functionality, high-quality concept of their first-generation models, and function as 434MHz 10mW ISM band radio modules, […]
Localization chip integrates triple-band RTK/GNSS receiver and triple-redundant inertial sensor
Acienna announced the availability of the new ACEINNA OpenRTK330L, a low cost, state-of-the-art, high-performance triple-band RTK/GNSS receiver with built-in triple-redundant inertial sensors. Designed to replace the expensive and bulky precision RTK/INS systems used in today’s autonomous systems, this compact navigation solution meets the challenging performance, reliability and cost requirements of the automotive market along with […]
RF PIN diodes now available from California Eastern Laboratories
California Eastern Laboratories (CEL) and LITEC Corporation announce a partnership allowing CEL to exclusively promote and sell LITEC’s RF PIN diode products in the Americas, Israel and India. CEL has a 60+ year history of marketing RF components to those territories. LITEC PIN diodes have been designed into most of the commercial radio systems in […]
Power dividers, directional couplers handle 40 GHz
Cinch Connectivity Solutions, a Bel group company, launches 40GHz power dividers and directional couplers designed to meet the higher frequency requirements in telecommunications and 5G applications. The Midwest Microwave 40 GHz power dividers and directional couplers are small, lightweight, and ruggedly built. They cover a wide bandwidth of 6 to 40 GHz with low insertion loss and low […]
RF couplers cover 26.5 GHz to 67 GHz range
Fairview Microwave Inc., an Infinite Electronics brand, has debuted a new line of high-frequency couplers that are ideal for point-to-point radios, 5G telecommunications, satellite communication, automotive radars, and aerospace applications. Fairview’s new series of high frequency RF directional couplers is comprised of 24 new models that deliver excellent isolation, low insertion loss, and very good return […]
Coax adapters cover 1.7 GHz to 26.5 GHz
Fairview Microwave Inc. has introduced a new series of waveguide to coax adapters that are ideal for use in 5G, telecommunications, satellite communications, point-to-point radio, automotive radar, and terrestrial communications applications. Fairview’s new line of waveguide to coax adapters consists of 50 models with aluminum construction for reduced weight and compatibility with existing aluminum systems. They support […]
What are RF waveguides? Part 2: implementation and components
Part 1 of this FAQ looked at the context and the need for waveguides; Part 2 looks at the implementation and available components. Q: What standard waveguide are available? A: There are thousands of models, configurations, and options. Most waveguides have flanges so they can be connected to create longer guides, or to provide turns […]
- 1
- 2
- 3
- …
- 13
- Next Page »
