onsemi announced the availability of the CEM102, a compact analog front-end (AFE) that enables electrochemical sensing with exceptional accuracy at very low currents. With its small form factor and industry-leading low power consumption, the CEM102 allows engineers to create versatile and compact solutions for industrial, environmental, and healthcare applications such as air and gas detection, […]
Industrial
Analog switch series offers enhanced monitoring in 1.8 V systems
Nexperia introduced a new series of 4- and 8-channel analog switches designed to monitor and protect 1.8 V electronic systems. This series of multiplexers includes AEC-Q100-qualified variants intended for use in automotive applications as well as standard versions suitable for a broader range of consumer and industrial applications including sensor monitoring and diagnostics, enterprise computing, […]
Next-gen op amps meet reliability requirements of AEC-Q100 Grade 1
NOVOSENSE Microelectronics has launched its new NSOPA series of general-purpose operational amplifiers. Engineered for automotive and industrial applications, these amplifiers can be widely used for signal conditioning of voltage, current, temperature, and other signals, OBC/DC-DC/PDU, traction inverters, BMS, thermal management, BCM, industrial automation, photovoltaic inverters, motor drivers, digital power supplies and charging stations. The inaugural […]
IoT front end module designed in adherence to Thread and Matter
pSemi Corporation announced the introduction of their smallest PA-LNA-SW Internet of Things (IoT) front-end module (FEM): the PE562212. Designed in adherence to the Thread and Matter protocols, industry frameworks that focus on simplifying connected experiences, PE562212 is an ultra-compact multi-protocol 2.4 GHz FEM that enables a variety of connectivity options for IoT devices. With a […]
Dual op-amp boosts sensor signals
STMicroelectronics’ TSB182 dual operational amplifier is featured for high-accuracy signal conditioning with sensors, including maximum 20µV input offset voltage, 100nV/°C drift over temperature, and 4V-36V operating range for medium-voltage applications. In addition to its high accuracy, stability, and wide supply-voltage range, the TSB182 is specified from -40°C to 125°C. With a maximum offset voltage of 30µV over […]
Automotive, industrial op-amps operate to 175C
STMicroelectronics’ TSZ181H1 and dual TSZ182H1 automotive-qualified operational amplifiers (op amps) deliver high accuracy and stability over a wide (-40°C to 175°C) temperature range. The high maximum operating temperature encourages use in harsh environments and in applications with long mission profiles. The op amps have very low input offset voltage, typically 3.5µV at 25°Cm, and input bias current, typically 30pA […]
Resins offer material options for harsh chemical conditions
SABIC introduced three new LNP CRX copolymer resins to give customers in the mobility and industrial sectors new material options that can resist both harsh chemicals and challenging environmental conditions. The new specialized polycarbonate (PC) copolymer-based LNP CRX products deliver the chemical resistance expected from this portfolio, in combination with exceptional weather ability (UL74C F1 […]
Bare element shunt resistors help lower thermal stress of PCBs
Current sensing for motor control applications often requires robust current handling and the lowest possible PCB temperatures. Unfortunately, high current or overload current handling typically means higher PCB temperatures. One cost-effective and popular solution to these requirements is a raised bare element sense resistor. The elevated bare element yields PCB temperatures of 30% to 40% […]
Eight SiC Schottky barrier diodes rated at 1200V
Diodes Incorporated announced the release of its first Silicon Carbide (SiC) Schottky barrier diodes (SBD). The portfolio includes the DIODES DSCxxA065 series with eleven products rated at 650V (4A, 6A, 8A, and 10A) and the DIODES DSCxx120 series with eight products rated at 1200V (2A, 5A, and 10A). These wide-bandgap SBDs bring the benefits of significantly […]
Precision thin-film resistors offer ±0.01% tolerances, ±2ppm TCRs
With the proliferation of electronics in nearly every market sector, there is an increasing need for precision resistors. For markets such as medical instrumentation and control, industrial and automotive controls, communications, and test & measurement, these precision resistors must maintain electrical and environmental stability long term. Stackpole’s RNCF series of precision thin film resistors meet these […]
