Current sensing for motor control applications often requires robust current handling and the lowest possible PCB temperatures. Unfortunately, high current or overload current handling typically means higher PCB temperatures. One cost-effective and popular solution to these requirements is a raised bare element sense resistor. The elevated bare element yields PCB temperatures of 30% to 40% […]
stackpole
Precision thin-film resistors offer ±0.01% tolerances, ±2ppm TCRs
With the proliferation of electronics in nearly every market sector, there is an increasing need for precision resistors. For markets such as medical instrumentation and control, industrial and automotive controls, communications, and test & measurement, these precision resistors must maintain electrical and environmental stability long term. Stackpole’s RNCF series of precision thin film resistors meet these […]
Automotive-grade chip resistors excel at handling pulses
High-reliability chip resistors can be more difficult to find and even more so when there are pulse handling requirements. Typically, the manufacturing process for thick film chip resistors allows for variation in the calibration trim, leading to variation in pulse handling performance. Stackpole’s recently released RPCA series addresses all these needs. The RPCA has limited to […]
Thin-film resistors excel in high sulfur, high humidity settings
Environmental stability for thin film resistors has become more important with increased electronic content. Sulfur contamination for film resistors, for example, is becoming a more prominent issue for a wide range of end products. Electronic devices and circuitry may encounter sulfur in the presence of oils, lubricants, gaskets, hoses, and atmospheric gasses in highly industrial […]
Precision tantalum nitride chip resistors offer anti-sulfur performance
Applications that require resistors with both environmental stability and high precision have limited options. Nichrome-based thin film resistors have excellent electrical performance and stability but can experience corrosion under prolonged exposure to high moisture environments. Many chip resistors, both thick film and thin film, with screen, printed inner terminations may experience resistance shifts and failure due […]
Anti-sulfur thick film chip resistors feature working voltage up to 75 V
Sulfur contamination for thick film resistors is becoming a more prominent issue for a wide range of end products. Electronic devices and circuitry may encounter sulfur in the presence of oils, lubricants, gaskets, hoses, and atmospheric gasses in highly industrial areas. Finding anti-sulfur resistors can be challenging and finding them with the ideal power and […]
Automotive grade thick-film chip resistors offer anti-sulfur performance
Many types of electronic products across a variety of market segments require higher reliability components. Automotive grade resistors offer increased reliability and improved performance without the high cost and limited availability of components procured to established reliability military specifications. Stackpole’s RMCA series is AEC-Q200 qualified and provides excellent long-term reliability. This series is produced on […]
Thick-film resistors feature high temperature stability
Commercial and industrial power electronics increasingly demand robust power supplies with high stability and low thermal resistance. For these requirements, standard chip resistors may not be the best solution. Wide terminal chip resistors, such as Stackpole’s RMCW, provide terminations on the long sides of the chip to provide better current handling and thermal resistance. The […]
Automotive grade chip resistors offer high reliability
Many types of electronic devices now benefit from the higher reliability of automotive-grade resistors. By specifying automotive-grade resistors, design engineers in any market segment can increase electrical stability and environmental reliability without the significant increase in cost normally associated with established reliability resistors. Stackpole’s RMCA series is AEC Q200 qualified and provides excellent long-term reliability. […]
Thick-film chip resistors feature full RoHS compliance
Surface-mount resistors have complied with the EU’s ROHS standards through exemption 7c-I. The exemption has been extended twice, but with an expiration date looming, many companies are seeking fully RoHS-compliant parts. To help companies transition to 100% RoHS compliant lead-free resistors, Stackpole offers its RMEF Series. Stackpole’s RMEF is a general-purpose resistor series offering resistance […]
